14
Wiring & Safety
WARNING: The unit MUST be earthed. All wiring must conform to current I.E.E.
Wiring Regulations and all applicable standards and Building Regulations.
1.
Electrical installation of the appliance MUST be carried out by a suitably
qualified competent person.
2.
Inspect the appliance. If damaged, it must be replaced by the manufacturer,
their service agent or similarly qualified persons in order to avoid a hazard.
3.
The appliance must be connected to a local double pole isolation switch with a
contact separation of at least 3mm. Ideally located adjacent to the unit.
4.
CME1
Q Plus
is suitable for 230V ~ 50/60Hz single phase with a fuse
rating of 3A.
5.
Mains switching can be achieved by use of the Titon Boxed Relay 5A TP 505
Wiring Connections Access
Access to the connections for mains, boost and other volt-free control functions
is via removal of the Cover. Cables must be routed as shown and secured with
clamps provided.
Internal Cable Routing
Cable Access
