15
RL60-2 /
Manual
Titgemeyer / 10342EN1121 / 1
English
Total weight (according to the
version)
1,99 kg
Dimensions (HxL)
331 x 336 mm
Blind rivet diameter
4 – 6,4 mm, max. Ø of
mandrel 4mm
Tractive force
17,9 kN / 6 bars
Stroke
27 mm
Speed of rivet cycle
1 s
Air consumption for 1 rivet
5,8 l [ANR]
Air consumption - exhaustion 465.5 l/min [ANR]
(78 l/min @6 bar)
Noise level
85,5 dB
Operating pressure
6 bars, max. pressure 7 bar
Compressed air connection
6 mm (G 1/4“)
Hydraulic oil standard
ISO VG 32, HLP (DIN 51524-2)
Hydraulic oil example
OH-HM 32
Lubricant standard
ISO XCCHB-2
Lubricant example
LV2EP
20. Disposal of the riveting tool
Disposal of the tool in compliance with
the directives valid for EU. Check for
hydraulic oil inside the riveting tool.
Remove it and dispose the oil in an
environmentally friendly manner.
21. Warranty
Titgemeyer GmbH & Co. KG provides a
12- month warranty from the date of
purchase. The warranty does not cover
consumables (jaws, nosepieces, man-
drels, etc.)
Titgemeyer GmbH & Co. KG warrants
that all power tools have been carefully
manufactured and that they will be free
from defect in material and workmans-
hip under normal use and service for
a period of one (1) year. This warranty
applies to the first time purchaser of the
tool for original use only.
Exclusions: Normal wear and tear. Perio-
dic maintenance, repair and replacement
parts due to normal wear and tear are
excluded from coverage. Abuse & misu-
se. Defect or damage that results from
improper operation, storage, misuse or
abuse, accident or neglect, such as phy-
sical damage are excluded from cover-
age. Unauthorized service or modifica
-
tion. Defects or damages resulting from
service, testing adjustment, installation,
20 times (Tool operation)
18. Troubleshooting
The operator must ensure the following:
—
The maintenance staff can be notified
immediately and at any time.
—
The maintenance staff is qualified to
properly respond to the failure of the
riveting tool and the failure of related
systems.
—
The failures are analysed by qualified
staff, any defects are repaired and the
operation is optimised in a way that
prevents any similar failures in the
future.
19. Technical parameters
