TITANTIG 200 DC PULSE PRO, Operating Manual

Page: 14 / 48

TitanTIG 200 DC Pulse Pro Operators Manual
Issue. A 0516
FALLING UNIT can cause injury.

Use lifting eye to lift unit only, NOT running gear, gas cylinders, or any other
accessories.

Use equipment of adequate capacity to lift and support unit.

If using lift forks to move unit, be sure forks are long enough to extend beyond
opposite side of unit
OVERUSE can cause OVERHEATING

Allow cooling period; follow rated duty cycle

Reduce current or reduce duty cycle before starting to weld again.

Do not block or filter airflow to unit.
STATIC (ESD) can damage PC boards.

Put on grounded wrist strap BEFORE handling boards or parts.

Use proper static-proof bags and boxes to store, move, or ship PC boards.
MOVING PARTS can cause injury
.

Keep away from moving parts.

Keep away from pinch points such as drive rolls.
WELDING WIRE can cause injury.

Do not press gun trigger until instructed to do so.

Do not point gun toward any part or the body, other people, or any metal when
threading welding wire.