TITANTIG 200 DC PULSE PRO, Operating Manual

Page: 12 / 48

TitanTIG 200 DC Pulse Pro Operators Manual
Issue. A 0516

Remove stick electrode from holder or cut off welding wire at contact tip when not in use.

Wear oil-free protective garments such as leather gloves, heavy shirt, cuff less trousers, high shoes, and a
cap.

Remove any combustibles, such as butane lighter or matches, from your person before doing any welding.
FLYING METAL can injure eyes.

Welding, chipping, wire brushing, and grinding cause sparks and flying metal. As
welds cool, they can throw off slag.

Wear approved safety glasses with side shields even under your welding helmet.
BUILDUP OF GAS can injure or kill.

Shut off shielding gas supply when not in use.

Always ventilate confined spaces or use approved air-supplied respirator.
HOT PARTS can cause severe burns.

Do not touch hot parts bare handed.

Allow cooling period before working on gun or torch.
MAGNETIC FIELDS can affect pacemakers.

Pacemaker wearers keep away.

Wearers should consult their doctor before going near arc welding, gouging, or spot
welding operations.