©2012 Toni Clark practical scale GmbH Zeiss-Str.10 D-32312 Lübbecke Tel. 0049 5741/5035 Fax. 05741/40338 www.toni-clark.com
Instructions Titan ZG 45PCI-HV
20
Silencer
The performance of the supplied si-
lencer is not bad, but rather noisy and
too big and for some models. We can
offer you much quieter stainless steel
silencers, that will fit better under the
cowlings.
Tuned Pipe
The Titan ZG 45PCI-HV performs very well with a tuned pipe. A tuned length of 720 mm
from the exhaust flange to the beginning of the baffle cone is best for most purposes.
Silencer # 4640 for our Piper, actually a ZG 62 is shown
Stainless steel Silencer #4630
Stainless steel Tuned Pipe #6588
These power curves are from a test carried out by Dietrich Altenkirch for the magazine “Modell”. They show the values of the old ZG 45SL. The power
of the ZG 45PCI -HV with the new standard silencer is more than shown, but the header lengths and rpm are correct also for the ZG 45PCI-HV.
Tuned pipe length from exhaust
flange to reflector (mm)
Torque reduced to:
1000 millibar, 15
o
Celsius
50% rel. humidity
Power reduced to:
1000 millibar, 15
o
Celsius
50% rel. humidity
Tuned pipe length from exhaust
flange to reflector (mm)
Standard silencer plus carb. intake tube.
Torque
Standard silencer plus carb. intake tube.
(Standard ZG 62
for comparison)
Po
w
er
(kW)
(hp)
RPM
RPM
