13
English
Cleanup
Important Cleaning notes - Read before cleaning
• When using latex materials, clean your sprayer and
components with water. When using oil-based materials, use
mineral spirits. DO nOT use gasoline to clean your sprayer.
• Do not use mineral spirits on latex materials, or the mixture
will turn into a jelly-like substance which is difficult to remove.
• No matter which cleaning solution you use, make sure to
dispose of it properly when finished cleaning your sprayer.
• Thorough cleaning and lubrication of the sprayer is the most
important step you can take to ensure proper operation after
storage.
Follow these steps whenever cleaning with
mineral spirits:
• Always flush spray gun at least one hose
length away from spray pump.
• If collecting flushed solvents in one gallon
metal container, place it into an empty five
gallon container, then flush.
• Area must be free from vapors.
• Follow all cleanup instructions.
• DO NOT use gasoline to clean your sprayer.
1. Lock the gun and remove the spray tip assembly. Place
the suction tube and return tube into an empty waste
container.
3. Remove the inlet filter from the suction tube and place
into the waste container.
2. Using a garden hose, rinse off the suction tube, return
tube and inlet filter. Empty the waste container.
4. Verify that the seals
are present inside the
adapter and suction
tube
(a)
. Thread the
pump cleaning adapter
(b)
onto a garden hose
(c)
. Connect hose and
adapter to the fitting on
the end of the suction
tube
(d)
.
(b)
(c)
(d)
(a)
Empty waste
container
Call 1-866-248-2698 if you have any problems or questions regarding the cleaning of your sprayer.
Follow these steps if you used latex materials and if you have a garden hose available. If you do not have a garden hose
available, follow the Cleanup - Oil-Based Materials instructions.
Continued on next page.
