EN
40
In
more
detail...
TTT831HDC-Li
by TITAN
WARNING!
This product has not been designed to provide protection
from electric shock in the event of contact with overhead electric lines!
Therefore do not use product near cable, electric power or telephone
lines. Keep a minimum distance of 10 m to all electric lines (Fig. 38).
9. Use the product only with secure footing. Hold the product at the right-hand
side of your body. Regularly change the working position and include rest
periods during operation.
10.Do not operate the product with arms fully extended or attempt to cut areas
which are difficult to reach.
11.Keep a firm, steady pressure on the product while working with it. Do not try
to force the product through the wood, let the cutting device do the work,
using the gripping teeth to apply minimal leverage pressure.
12.Beware when reaching the end of the cut. The weight of the product may
change unexpectedly as it cuts free from the wood. Accidents can occur
to the legs and feet. Always remove the product from a wood cut while it is
running.
Pruning
Fig. 37
Fig. 38
NOTE:
The chain must be running at full speed before it comes into
contact with the wood.
Thin branches
Thin branches can be cut off with one single cut. To prevent the branch from
slivering and buckling the branch should be cut off in several pieces (Fig. 39).
Operation
Summary of Contents for TTT831HDC
Page 56: ......
