Titan TTT831HDC Instructions Manual Download Page 20 | Manualshive

Page: 20 / 56

background image

EN

20

TTT831HDC-Li

by TITAN

Getting

started...

Your product / Before you start

Unpacking

1. Unpack all parts and lay them on a flat, stable surface.

2. Remove all packing materials and shipping devices if applicable.

3. Make sure the delivery contents are complete and free of any damage. If

you find that parts are missing or show damage do not use the product but

contact your dealer. Using an incomplete or damaged product represents a

hazard to people and property.

4. Ensure that you have all the accessories and tools needed for assembly and

operation. This also includes suitable personal protective equipment.

WARNING!

The product and the packaging are not children’s toys!

Children must not play with plastic bags, sheets and small parts!

There is a danger of choking and suffocation!

You will need

(items not supplied)

Suitable personal protective equipment

Suitable hex key

Lubricant for blade

NOTE:

The accessories required depend on the intended application.

Ask your dealer for advice.

Your product

NOTE:

Parts marked with * are not shown in this overview. Please

refer to the respective part in the instruction manual.

(items supplied)

Blade cover (16)

Guide bar cover (18)

Harness (30)

Multi-tool (31)

Battery pack (32)

Charger (33) and its manual

«
...
18
19
20
21
22
...
»

Summary of Contents for TTT831HDC

























































Reviews:

No comments

Related manuals for TTT831HDC

BASIC PE-AHS 18 Li

Brand: Pattfield Ergo Tools Pages: 250

Brand: Weed Eater Pages: 11

Ear, Nose & Brow

Brand: Wahl Pages: 2

Brand: Toro Pages: 16

POWERED CASE TRIMMER

Brand: GTC Pages: 10

HGE 18-45 Battery

Brand: Kärcher Pages: 213

Brand: Kärcher Pages: 404

Brand: iolloi Pages: 26

Brand: Power Plus Pages: 9

Brand: Talon Pages: 3

Brand: McCulloch Pages: 9

Brand: Renfert Pages: 3

Brand: King Canada Pages: 11

Brand: MTD Pages: 76

Brand: Racing Pages: 16

Brand: Tanaka Pages: 21

Brand: UltraPro Pages: 2

Brand: Garland Pages: 144

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands