background image

Health Surveillance

All employees should be part of an employer’s health surveillance scheme to help identity

any vibration related diseases at an early stage, prevent disease progression and help

employees stay in work.

Residual risks

Even if you are operating this product in accordance with all the safety requirements,

potential risks of injury and damage remain. The following dangers can arise in connection

with the structure and design of this product:

1. Health defects resulting from vibration emission if the product is being used over long

periods of time or not adequately managed and properly maintained.

2. Injuries and damage to property due to broken application tools or the sudden impact of

hidden objects during use.

3. Danger of injury and property damage caused by flying objects.

          WARNING!

This product produces an electromagnetic field during operation! This field may under

some circumstances interfere with active or passive medical implants! To reduce the risk of

serious or fatal injury, we recommend persons with medical implants to consult their doctor

and the medical implant manufacturer before operating this product!

Important note:

Be sure the supply is the same as the voltage given on the rating plate for the charger. The

charger is fitted with a two-core cable and plug.

Remove the mains plug from socket before carrying out any adjustment or servicing.

SYMBOLS

                    To reduce the risk of injury, user must read instruction manual

                    Warning

      

                    Waste electrical products should not be disposed of with household waste.

Wear ear protection

                    Please recycle where facilities exist. Check with your Local Authority or retailer 
                    for recycling advice.

                   

Li-Ion

10.8V IMPACT DRIVER

Summary of Contents for TTP452IPD



















Reviews: