Titan TTL650GDO, Safety And Operating Manual

Page: 5 / 27

Pole Pruner Attachment TTL650GDO
11. Carry the product by the front handle with the product switched off and away from your
body. When transporting or storing the product always fit the guide bar cover. Proper handling
of the product will reduce the likelihood of accidental contact with the moving saw chain.
12. Follow instructions for lubricating, chain tensioning and changing accessories. Improperly
tensioned or lubricated chain may either break or increase the chance for kickback.
13. Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery
causing loss of control.
14. Cut wood only. Do not use the product for purposes not intended. For example: do not use
the product for cutting plastic, masonry or non-wood building materials. Use of the product for
operations different than intended could result in a hazardous situation.
15. Pay attention to national and local regulations. National and local regulations may restrict
the use of this product.
16. Remove branches in sections.
17. Beware of dangerous operating positions as well as of the risk of being struck by falling
branches or by those that rebound after hitting the ground.
18. Beware of overhead power lines. Do not use the product in any position that causes any
part to come within 10m of overhead electrical lines.
19. Never cut in areas where the cutting attachment is out of sight.