Troubleshooting
PROBLEM
LIKELY CAUSE
SOLUTIONS
5. The engine
stops
6. Starting is
difficult or the
engine runs
erratically
7. Weak engine
performance
during cutting
8. Engine stops
when blade is
engaged
9. Uneven cut
and poor grass
collection
– faulty ignition
– earth connections of the
microswitches disconnected
– fault in carburation
– forward speed too high in relation
to cutting height
– movement on the blade
engagement lever is too fast
– you are not ready to engage
the blade
– cutting deck not parallel
to the ground
– blade cutting badly
– forward speed too high compared
to height of grass
– collector channel is blocked
– cutting deck full of grass
– check that spark plug caps are
firmly fitted
– check that the electrodes are
clean and have the correct gap
– check connections
– clean or replace the air filter
– flush out the float chamber
– empty fuel t
ank and refill with
fresh fuel
– check and, if necessary, replace
fuel filter
– reduce the forward speed and/or
raise the cutting deck
( page 25)
– do it more slowly
– check that the safety
requirements are met
( page 23)
– check the tyre pressure
( page 25)
– realign the cutting deck
to the ground
– Contact your dealer
– reduce forward speed and/or
raise the cutting deck
( page 29)
– wait for the grass to dry
– remove the grass-catcher and
empty the collector channel
( page 31)
– clean the cutting deck
( page 32)
In
mor
e
detail
...
37
GB
IE
TTK550LWM by TITAN
Summary of Contents for TTK550LWM
Page 41: ......
