Operation
Electric Start
– the speed change is activated (
from page 19
- 22) or the drive pedal (
from page
19
- 22) with the parking brake on.
DIRECTIONS BEFORE STARTING
Before starting to mow, it is necessary to carry out several checks and operations to ensure
you can work efficiently and in maximum safety.
Seat adjustment
The seat is held by four screws (1) which have to
be loosened for changing the position of the seat
which is done by sliding it along the slots in the
base.
When you have got in a comfortable position, fully
tighten the four screws.
Refuelling
NOTE
The oil and fuel to use are indicated in
the engine booklet.
To reach the oil dipstick, turn the seat over and remove the cover
underneath.
With the engine stopped, check its oil level which must be be-
tween the MIN and MAX marks on the dipstick.
Refuel using a funnel, but do not completely
fill the tank.
The tank’s capacity is about 4 litres.
Refuelling should
be carried out in an open or well
ventilated area with the engine
stopped. Always remember that petrol
fumes are flammable. DO NOT TAKE
FLAMES TO THE TANK MOUTH TO
VERIFY ITS CONTENTS AND DO NOT
SMOKE WHEN REFUE L L ING.
In
mor
e
detail
...
24
TTK550LWM by TITAN
GB
IE
Summary of Contents for TTK550LWM
Page 41: ......
