Operation
End of work
Once you have finished mowing, stop the machine and engage the parking brake.
Electric Start
– shift the accelerator lever to «SLOW»;
– switch off the engine by turning the key to «STOP»;
– close the fuel tap (1).
Always take out the ignition key before
leaving the machine unattended!
IMPORTANT
To keep the battery charged, do not leave
the key in the «ON» position when the engine is not running.
Manual start
– shift the accelerator lever to «OFF»;
– close the fuel tap (1).
Always make sure the accelerator lever is in the «OFF»
position before leaving the machine unattended; then wait till the motor has
cooled and disconnect the spark plug cap.
Cleaning the machine
After each mowing, clean the outside of the machine, remove the grass-catcher, the rear
discharge guard or side discharge chute and shake them to remove residual grass and earth.
Always empty the grass-catcher and do not leave containers
full of cut grass inside a room.
Clean the plastic parts of the body with a damp sponge using water and detergent, taking
care not to wet the engine, the electrical parts or the electronic card located under the seat.
IMPORTANT
Never use hose-nozzles or harsh detergents for cleaning the body
and engine!
Do not let debris and dry remains of grass accumulate in the
upper part of the cutting deck in order to keep maximum machine efficiency and
safety levels.
After each use, accurately clean the cutting deck to remove any grass remains or debris.
Wear eye protection and keep people or animals away from
the surrounding area when cleaning the cutting deck.
a)
When washing the
inside of the cutting deck
and the collector channel, the machine
must be on firm ground:
– prepare the machine according to the operating mode that was used the last time
(
page 25);
In
mor
e
detail
...
32
TTK550LWM by TITAN
GB
IE
Summary of Contents for TTK550LWM
Page 41: ......
