TTB892MLT
Getting
started...
EN
20
Before you start
Setup
NOTE:
Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid lost.
Tool attachments
Different tool attachments can be used with this product depending on the material
being worked. Select a suitable tool attachment according to the intended use, by
referring to the following table.
WARNING!
Always use tool attachments according to the intended
use!
Observe the technical requirements of this product (see section
Some tool attachments are very sharp and become hot during use!
Handle them carefully! Wear protective gloves when handling tool
attachments in order to avoid injuries like burns and cuts!
WARNING!
Ensure the tool attachments are correctly attached.
Incorrect or insecurely fastened tool attachments can come loose
during operation and cause a hazard.
NOTE:
Tool attachments are available in various shapes and sizes.
Below is only an overview of the supplied tool attachments. Ask in
store for more choices.
Tool attachment
Material
Application
Sanding base
plate (7) &
sanding paper
(11)
Bare or painted
wood, plaster,
and other surface,
depending on
grain size (grit) of
sanding paper
Flat sanding and
reaching into
corners and along
edges
