28
TTB774VAC by
TITAN
In
more
detail ...
General operation
> Check the product, its power cord and plug as well as accessories and
attachments for damage before each use. Do not use the product if it is
damaged or shows wear.
>
Double check that the accessories and attachments are properly fixed.
>
Ensure that the air vents (2d) / air outlet (7) are always unobstructed and clear.
Clean them if necessary with a soft brush. Blocked air vents / air outlet may lead
to overheating and damage the product.
> Switch the product off immediately if you are disturbed while working by other
people entering the working area.
> Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
NOTE:
Switch the product off and disconnect it from the power supply if it
stops suddenly during operation and does not produce any suction.
Refer to the instructions below about removing blockages and the
chapter “Troubleshooting”.
Vacuuming
This product is designed for dry and wet vacuuming. Each operation requires
different accessories and attachments. Consult the section Product configurations
for details.
> Assemble the product according to the desired operation.
> Attach the extension tube(s) (10) onto the hose handle (9a) if required.
>
Attach the desired attachment onto the hose handle / extension tube.
>
Switch the product on and hold the hose handle firmly.
> Keep the attachment on the working surface in front of you.
> Move in slight overlapping rows. The most effective pattern is straight lines
along one of the sides. This will keep the rows even and ensures that the entire
working surface is cleaned up without missing any spots (Fig. 22).
Fig. 22
Operation
