21
TTB774VAC by
TITAN
Getting
Started ...
Before you start
Liquid collection
NOTE:
Always ensure the dust filter (14) and dust bag (15) are NOT
assembled before wet vacuuming.
> Slide the foam sleeve (13) onto the motor unit (2) (Fig. 9). Ensure it sits properly
in position.
> Place the motor unit (2) with foam sleeve (13) onto the tank (3) and secure it
with the clasps (3a) and clasps grooves (2f) (Fig. 10). Ensure the motor unit sits
properly on the tank and the connection is properly sealed.
2
13
Fig. 9
2.
2
3a
2f
3
1.
Fig. 10
Hose (vacuuming)
> Align the arrow on the hose connector (9b) with the tab on the outer opening
of the air inlet (5) and slide the hose connector into the outer opening of the air
inlet (Fig. 11, step 1).
> Rotate the hose connector (9b) clockwise and ensure the connection is properly
secured (Fig. 11, step 2).
> Rotate the hose connector (9b) anticlockwise and pull it from the air inlet (5) to
disconnect the hose (9) after use (Fig. 12).
