46
Product functions
TTB674TAS
by TITAN
In
more
detail…
>
This operation is the same as crosscutting, except that the mitre gauge is locked
at an angle other than 90°.
>
Set the blade to a 0° bevel angle, and tighten the blade bevel locking handle.
>
Set the mitre gauge to the desired mitre angle, and secure it in position
by tightening the mitre gauge locking handle.
>
Hold the work piece firmly against the parallel profile of the mitre gauge
throughout the cutting operation.
Mitring: 0° - 45° mitre angle
Fig. 32
> Set the miter gauge to the desired angle.
> Set the blade bevel to the desired bevel angle, and tighten the blade bevel locking
handle.
> Hold the work piece firmly against the face of the miter gauge throughout the
cutting operation.
GB
IE
