24
Fig. 20
Product functions
TTB545SSW
by TITAN
In
more
detail…
GB
IE
> Layout or secure design to workpiece.
> Move the blade guard foot to the highest position by loosening the height
adjustment knob (19). Retighten.
> Tilt the table to the desired angle by loosening the table bevel lock (8)
and turning the bevel adjustment knob (26) to move the table to the proper angle
using the degree scale and the pointer (46).
> Tighten the table bevel lock handle (8).
> Loosen the blade guard screw, and tilt the blade guard to the same angle as
the table. Retighten the blade guard screw. See Hold down clamp adjustment.
> Position the workpiece on the right side of the blade. Lower the blade guard
foot against the surface by loosening the height adjustment knob. Retighten.
> Follow steps 5-7 under Freehand cutting.
Angle cutting (bevel cutting)
> Lay out the design on the workpiece. Drill a 1/4" hole in the workpiece.
> Remove the blade. See Blade removal and installation.
> Place the workpiece on the saw table with the hole in the workpiece over the
access hole in the table.
> Install a blade through the hole in the workpiece.
> Follow steps 3-7, under Freehand cutting.
> When finished making the interior scroll cuts simply turn the scroll saw OFF.
Unplug the saw before removing the blade from the blade holder. Remove
the workpiece from the table.
Interior cutting
40°
30°
20°
10°
0°
10°
20°
30°
40°
8
46
26
