Storage compartment
A storage location (35) for small accessories.
Align the bevel indicator
The bevel indicator has been factory adjusted, it should be rechecked prior to use
for best operation.
> Remove the blade guard foot (6) using a hex key to loosen the screw (24) with
5mm hex key.
> Loosen the table bevel lock handle (8) and turn the table adjustment knob (26) to
move the table until it is approximately at a right angle to the blade.
> Use a combination square (36) (not provided) to set the table exactly 90º to the
blade (25). If there is space between the square and the blade adjust the table
angle until the space is closed.
> Tighten the table bevel lock handle (8) to prevent movement.
> Insert the bolts 8 x 50mm (30), spring washers M8 (31), rubber feet (32), flat washers
(33) and nut (34) into the holes in turns as shown in Fig. 1.
> Then tighten the 4 bolts (30) with 12mm spanner (not supplied).
13
TTB545SSW
by TITAN
Before you start
Getting
started...
GB
IE
Fig. 2
35
Fig. 1
28
33
32
30
34
31
