be checked periodically to inger tightness.
Lubricate the Spindle drive with oil every six months. Spindle guide screw should
periods.
Spread oil onto unplated surfaces especially if the machine is not used for long
Remove all swarf and dust after each operation.
Caution: Do not use water-based coolant or any kind of continuous coolant pump.
of drill bits.
Always lubricate drill bits with suitable oil when drilling. This will prolong the life
agent or similarly qualified persons in order to avoid a hazard.
If the power cable is damaged, it must be replaced by the manufacture, service
TTB541DBT
Care
and
mainterance
20
Maintenance
Summary of Contents for TTB541DBT
