Titan TTB541DBT, Manual, Page: 11 / 20

tighten them.
Install three Feed Handles in to the Feed Bars and
tighten them.
Thread the Feed Bars in to the Handle Seat(5) and
Feed Handles/Bars
place.
Tighten the two Set Screw to secure the Headstock in
far as it will go.
the Column(7), and gently slide it down the Column as
With the help of an assistant, lift the Headstock above 2.
-stock(17) so they will stay clear while installing it.
Loosen the two Set Screws on the left side of the Head
against the flat part of the Shaft.
Secure the Crank(12) to the Shaft using the Screw 5.
side of the Table Support(15).
Slide the Height Crank(12) over the shaft on the 4.
TTB541DBT
Assembly
Fig 5a
Fig 5b
Fig 6
11
Headstock to Column
1.
3.
Fig 7
1.
2.
12
15
Shaft
Screw
12
17
7
Set Screw
5
Feed Bar
Feed Handle
(Fig 7)
(Fig 6)
(Fig 5b)
(Fig 5a)