10
·
When pressing the power button during the massage it will automatically stop all
functions. Press the power button twice and it will go back to the default position.
·
Memory function :
To program your favorite massage wait till the massage timer
has ended. Then hold down one of the three memory buttons and hold down until
you hear a beep. Once completed you can press the power button and turn off the
chair. Your setting has been stored into the chairs memory.
（1）
（2）
Method of usage
Method of usage
POWER INPUT
FUSE: T5AL 250V
CONTROLLER JACK
ON/OFF
·
Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply
Remote control outlet
·
·
Once the legrest is firmly in place, press mildly down on the calf portion of the
legrest to make sure it is correctly mounted. Be sure your legs and feet are not
directly under the legrest when mounting or testing to ensure your safety.
On the top part of the legrest is a cover(tab) that goes under the seat cushion
(chart 2). be sure the tab is laying flat under the cushion.
Note
（
chart1
）
（
chart2
）
4.Calf installation
·
Use the Allen wrenches lock two hexagon socket head screws. (chart5).
·
The install hole of rail shelf (chart 1).
·
Align the holes from the footrest the front of the chair
. (Outside) (chart2).
·
Place the flat washer into the pin shaft. (chart3).
·
Insert the pin and washer as shown in chart 4. Be sure to insert the pins on both
side with the fat part of the bolt facing inwards.
Chart 1
Chart 2
Chart 3
Chart 4
Chart 5
·
The multi-layered pillows allow you tho control the intensity of the neck and
shoulder massage. Flip back each layer to increase the intensity as shown
below.
·
Backrest cushion and backrest
is
connected by
zipper (1), head cushion and
backrest pad connected by t
velcro as shown in illustration (2).
Zipper
Thread gluing
5.
Mounting the bakrest pad and head cushion
Memory
Button
Description
Display
Memory
program
Menory
3.Turn
ing
off power
and programing
