07
06
During the
computer scan the rollers will detect the position of the shoulders. The
monitor will will indicate the where the rollers are during the analysis period. Right
after the scan is complete the remote will make a "beeping sound", during that time
you will be able to adjust the starting position of the massage higher or lower using
the up and down button on the remote. There is only a 5 sec time period to initiate
the adjustment before the massage starts. There are 6 preset massage programs to
select from along with 3 memory settings.
①
、
Press power butto
n to
start massage
process
.
②
、
Select a massage program and the chair will conduct a computer body scan for
the fist 30 seconds.
③
、
Once the body scan is complete you immediately adjust the massage starting
point if you wish to start higher or lower. There is a 5 sec window to make the
adjustment.
.
·
Memory function massage:
in manual mode select a custom massage and press and
hold down one of the three memory buttons store the massage for the next time.
Memory
1.Switch power supply on
position
Connect the remote to circular outlet The power cord is inserted on the right outlet
POWER INPUT
FUSE: T5AL 250V
CONTROLLER JACK
ON/OFF
Illustration of the actual remote control
Method of usage
Method of usage
2.start massage
Button
Description
Display
“Up” Shoulder Position
“Down” Shoulder Position
Press to move the
roller heads to a higher position
Press to move the
roller heads
to a
lower
position
Shoulder
adjust
High shoulder position
Suitable shoulder position
Low shoulder position
Button
Description
Display
Memory
program
Menory
