17
TN-1341 INSTRUCTION MANUAL
THREADING THE BOBBIN
Threading the bobbin correctly ensures that you will have consistent stitching and end up with a
premium quality product. The Titan TN-1341 machine came with 2 versions of a vertical axis
shuttle. The first is a capless shuttle that and the second is a shuttle with a cap. Depending on
which your machine has, use the following instructions for threading the bobbin.
BOBBIN CAP STYLE
1.
Hold a bobbin so that the end of the thread wound
round the bobbin is directed to the right (clockwise) and put it
into the bobbin case.
2.
Pass the thread into the threading slit (Fig 14, Item 3) in
the bobbin case, then route it under the tension spring and
draw it out from notch �.
LATCH STYLE
Figure 14
1.
Pass the thread into the threading slit (Fig
15, Item 1) in the inner hook, pass under
protruding section (Item 2) and route it to
the tension spring.
2.
Adjust the bobbin so that it rotates in the
direction of arrow mark when the bobbin
thread is pulled.
Figure 15
