Titan TI-Jupiter, User Manual

Page: 14 / 14

Trouble Possible reason Troubleshooting
Check if the control is on or not. Open control switch
A massage function was not selected Choose massage function
The massage chair does
not work after being
powered on.
check if the power cord is firmly
inserted into the outlet and the chair.
Wire or plug has been damaged.
Make sure plug and socket are connected.
Please ask manufacturer or appointed
or authorized technician to inspect and
repair.
The fuse burned out.
Replace fuse of same specification.
Something wrong with inner circuit
There is beep sound from the Sound is originating from air pump or
motor.
inside while working.
Different height of the left
The chair is working fine but slightly off
level.
roller and right roller.
Sound suddenly becomes
much louder while working.
Check if the chair has been running for
more than 60minutes
Suddenly power-down
timer has expired.
Check if there are any obstacles; the
chair overloads; for the sake of safety,
sometimes the massage machine may
automatically stop working.
Excessive operation; the timer has
expired
The chair may be overused
Please ask manufacturer or
appointed certified technician to
inspect and repair.
This sound is normal once the
chair has broken in.
The arm or spring is bent or broken
Turn off the power to have the
massager rest for over half an
hour before next usuage.
Turn off the power to have the
massager rest for over half an
hour before next turn working.
Remove the obstacles; turn off
the power to have the massager
rest for over half an hour before
using again.
Please ask manufacturer or appointed
or authorized maintenance man for
checking and replacement.
Turn off the power to have the
massager rest for over half an
hour before using again.
Massage function suddenly
stops while working.
Neither the backrest nor the
legrest can be lay down.
The chair can't return to its
original position.
Electric wire or plug is
extremely hot.
There may be an electrical issue
Stop using and call your
manufacturer immediately.
B e
sure to unplug power
Note: If the troubles are not caused by above reasons, please turn off the power switch and
cut off the power, then contact the manufacturer or service agent to repair your chair.
Name
Massage Chair
Power
Model RK7909
NW/GW
DAC120V, 60Hz
Input voltage
DAC220V. 50/60Hz
DAC240V, 50Hz
Packing size
Safety design
Class I
Technical data
200W
Main body :78/102 kg
Armrest : 15.5122kg
Legrest &footrest : 15/17 .5kg
Main body:151Qx79Qx1Q30 mm
Armrest: 1245x41 Qx655 mm
Legrest &footrest :530 x 445 x 540 mm
(LXWXH)
-
�