WARNING: READ BEFORE INSTALLATION OR USE
OF
THE TITAN
TANKLESS WATER
HEATER
THE USER OF THIS TANKLESS WATER HEATER AGREES THAT BEFORE
INSTALLATION OR USE OF THE HEATER HE/SHE HAS READ THIS WARNING
AND UNDERSTANDS ALL TERMS AND CONDITIONS, IN PARTICULAR
THE LIMITATIONS OR EXCLUSIONS OF STATUTORY OR COMMON LAW
WARRANTIES AND LIABILITY.
LIMITATIONS
OF
WARRANTIES
AND
LIABILITIES:
THE END USER IS AWARE THAT THE MANUFACTURER AND AUTHORIZED
DEALERS OF THIS TANKLESS WATER HEATER CAN NOT GUARANTEE
THAT IT WILL NOT SUFFER A WATER LEAK OVER TIME. ITS LIFE DEPENDS
GREATLY ON THE WATER QUALITY AND PROPER INSTALLATION.
NIAGARA INDUSTRIES INC. AND ITS AUTHORIZED DEALERS ARE
NOT LIABLE TO END USERS OR THIRD PARTIES FOR INCIDENTAL,
CONSEQUENTIAL, SPECIAL OR CONTINGENT DAMAGES OR EXPENSES
ARISING DIRECTLY OR INDIRECTLY FROM ANY STRUCTURAL FAILURE
OF THE WATER HEATER. THE LIMIT OF LIABILITY SHALL BE TO REPAIR
OR REPLACE THE TANKLESS WATER HEATER DURING THE WARRANTY
PERIOD AT THE MANUFACTURE DISCRETION. NO OTHER WARRANTIES
APPLY. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.
PLEASE RETURN THE WATER HEATER TO THE PLACE OF PURCHASE
FOR A FULL REFUND IF THESE TERMS OF THE WARRANTY ARE NOT
ACCEPTABLE.
CAUTION: Titan Tankless Water Heaters are manufactured with materials
that are resistant to corrosion due to poor water quality and galvanic
corrosion. However, the water quality in your area among other things may
have an effect on these materials. Sediment build-up inside the unit can also
occur thereby reducing the life of the water heater. Galvanic corrosion may
occur if the water heater is not properly installed with material designed
to reduce or eliminate this possibility. Therefore, it is important that your
water heater is install by a licensed professional who will consider these
factors and recommend ways for you to extend the life of the heater and
reduce or eliminate the possibility of a malfunction resulting in leaks and
expensive water damage to your home or office. It is highly recommended
that the heater will be installed in an area that provides sufficient water
drainage to prevent damage to the walls, baseboards, appliances and other
fixtures in your home. If no floor drainage is available, a drip pan with a
minimum of 1 inch depth should be installed bellow the water heater and
connected to a suitable drain.
Alternatively, a proper leak detection system and shut-off components
should be incorporated in the installation of the water heater to turn off
your water supply in the event of a leak.
Consult your licensed professional installer for additional recommendations
on how to prevent extensive water damage to your home in the event of
a leak.
