Titan PR 33, Instruction Manual

Page: 24 / 66

PR33/SPZ/HR32/HHA
24 / 66
Use only original TITAN closure sleeves!
Do not exceed air pressure!
Never exceed the max. permissible air pressure of 6.0 bar..
The use of straps other than those recommended can result in
broken straps during the tightening process and insufficient
strapping.
Use only corresponding quality products from TITAN!
Working place
Keep your working place tidy. Disorder at the working place may
lead to the risk of accidents. During strapping operations pay
attention that you stand safely and have a problem-free balance to
prevent the risk of falling.
Never operate the unit at an unfavourable working position!
Use original connection coupling.
Use only connection couplings that comply with the safety
regulations.
Do not use gas or compressed air bottles!
The unit must not be connected to a gas or compressed air bottle.
This units may only be operated by staff having been instructed as
to the handling of the units. In case of questions do not hesitate to
contact the
TITAN packaging consultant.
Maintenance
Just a unit being problem-free is a safe unit. Regularly check the
state of your unit for defective or worn parts. Never operate a unit
which has defective or worn parts. Alterations to units are strictly
forbidden. Disregarding this requirement may result in serious
injuries.
max. 6,0 bar
H363 EU 17/11