t: +44 (0)161 406 6480 ● e: [email protected] ● w: www.titanproducts.com
UK DESIGNED, DEVELOPED AND MANUFACTURED
Ref: SKU 224
Setup
Device Setup:
Device ID
A unique network wide device number in the range 0 to 4194302. Ensure this is unique
to all other devices on the network.
Device Name
This is the name of the device E.g. Router 1.
APDU Timeout
This is the time to wait in m/s before re-transmitting an unacknowledged message
APDU Retries
This is maximum number of times an unacknowledged message is re-transmitted
Locations
This is the physical location the device is installed
Description
This is a description of the installed device
IP Primary Setup:
IP Address
The default IP Address is 192.168.1.151. This must to be set to a valid IP address which is
unique to the local network. In the case of the default network this would be 192.168.1.x
where x is in the range 0-254.
Subnet Mask
This is the current Subnet Mask address of the router (255.255.255.0 default). Devices on
the same subnet should all use the same subnet mask.
Default Gateway
The default is 192.168.1.254. This should be set to the IP address of the router that is
assumed to know how to forward packets on to other networks, defining where to send
packets for IP addresses for which they can determine no specific route.
UDP Port
This the port being used for BACnet and must match other devices on the same
BACnet Network.
Multicast Address
Please enter a valid Multicast address or remove if not required.
BACnet Network Number
This is the BACnet Network number for BACnet IP.
IP Secondary Setup:
Enable Port
Enable/Disable the secondary IP port
UDP Port
This the port being used for BACnet and must match other devices on the same BACnet
Network.
Multicast Address
Please enter a valid Multicast address or remove if not required.
BACnet Network Number
This is the BACnet Network number for BACnet IP.
Public IP Address
If the TP-NM-R/2000 is being accessed through a NAT router, please enter the public IP
address of the NAT router or remove if not required.
MS/TP Setup:
MAC Address
This is a unique MAC reference given to each device on the network. This needs to
be unique for each devices and ranges from 0-127.
