background image

Page 13 of 13 

 
 
 

 

 

LIMITED WARRANTY

 

 
 
 

Limited Warranty

   Titan Tire Corporation (TITAN) warrants its products to be free from defects in material and workmanship for one year from date of 

delivery to the original purchaser when properly installed, used and maintained by the purchaser. 
 
This warranty does not apply to damage or loss caused by any or all of the following circumstances or conditions: 

‰

 

Freight damage. 

‰

 

Parts, accessories, materials or components not obtained former approved in writing by TITAN. 

‰

 

Misapplication, misuse and failure to follow the directions or observe cautions and warnings on installation, operation, application, inspection 
or  maintenance  specified  in  any  TITAN  quotations,  acknowledgements,  sales  literature,  specification  sheet  or  installation  instructions  and 

service manual (“applicable literature”) 

 
If any TITAN products are found upon TITAN’S examination to have been defective when supplied, TITAN will either:  credit the purchaser’s account for 
the  purchase  price  of  the  TITAN  product;  or  repair  the  product.    TITAN  has  sole  discretion  in  choosing  which  option  to  provide.    For  this  LIMITED 
WARRANTY to apply, TITAN must receive notice of the alleged defect within 30 days of either the discovery of the alleged defect or the expiration of the 
warranty period, whichever is earlier.  Any claim not made with in this period shall conclusively be deemed waived. 
 
If requested by TITAN, purchaser shall return the alleged defective product to TITAN for examination at Titan’s direction and expense.  TITAN will not 
pay  for  expenses  incurred  in  returning  a  product  to  TITAN  without  TITAN’S  prior  written  authority.    TITAN  shall  not  be  liable  for  any  other  expenses 
purchaser incurs to remedy any defect.  Purchasers waive subrogation on all claims under any insurance. 

 

Limitation  of  Liability

  It is expressly agreed that the liability of TITAN is limited and TITAN does not function as an insurer.  THE REMEDIES SET 

FORTH IN THIS WARRANTY SHALL CONSTITUTE THE EXCLUSIVE REMEDIES AVAILABLE TO THE PURCHASER OR USER AND ARE IN LIEU 
OF ALL OTHER REMEIDIES, EXPRESS OR IMPLIED.  THE LIABILITY OF TITAN, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY 
OR OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE OF THE PARTICULAR PRODUCT MANUFACTURED, SOLD OR SUPPLIED BY 
TITAN. 

 

To Obtain Technical Assistance

  To enable TITAN  to respond to a request for assistance or evaluation of customer or user operation difficulty, please 

provide at a minimum the following information by calling 1-800-872-2327 or within Iowa 1-515-265-9200: 

‰

 

Model number, serial number and all other data on the specific component which appears to be involved in the difficulty. 

‰

 

The date and from whom you purchased your TITAN product. 

‰

 

State your difficulty, being sure to mention at least the following:  Application, Nature of load involved, and Weight of the load. 

 

Field Service

   If field service at the request of the purchaser is rendered and the difficulty is found not to be with TITAN’S product, the purchaser shall 

pay  the  time  and  expense  (at  the  prevailing  rate  at  the  time  of  service)  of  the  seller’s  field  representative(s).    Charges  for  service,  labor  and  other 
expenses that have been incurred by the purchaser, its customer or agent without prior written authorization of TITAN will not be accepted. 
 
TITAN  EXTENDS  NO  WARRANTY,  EXPRESS  OR  IMPLIED,  ON  PRODUCTS  NOT  MANUFACTURED  BY  TITAN  OR  TO  TITAN’S  DESIGN 
SPECIFICATION,  INCLUDING  BUT  NOT  LIMITED  TO  SUCH  ITEMS  AS  NON-TITAN  TIRES,  BRAKES,  ACTUATORS,  BEARINGS,  HOSE  AND 
TUBING, PURCHASER’S RECOURSE SHALL BE LIMITED TO ANY WARRANTY OF THE PERSPECTIVE MANUFACTURERS. 
 

THIS  WARRANTY  EXCLUDES  ALL  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE  OR  ANY 
PURPOSE. 

 

THIS WARRANTY DOES NOT COVER NOR EXTEND TO INCIDENTAL OR CONSEQUENTIAL DAMAGE.

  Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 
 
No representative has authority to make any representation, promise or agreement except as stated in this Limited Warranty.  TITAN reserves the right 
to make design and other changes upon its products without any obligation to install the same on any previously sold or delivered products. 
 

THERE  ARE  NO  WARRANTIES  WHICH  EXTEND  BEYOND  THOSE  DESCRIBED  ABOVE.    EFFECTIVE  JANUARY  1,  1998  THIS 
WARRANTY SUPERSEDES ALL PRIOR WARRRANTIES, WRITTEN OR IMPLIED. 

 
 

 
 
 

Summary of Contents for AERO 7500














Reviews: