26
Operation
TTB1300PRW by TITAN
EN
In
more
detail...
NOTE:
Always keep a reasonable distance between the nozzle and
the object to be washed in order to avoid damage.
7. Release the trigger (8d) to stop the water jet.
Tips
WARNING!
Prevent water from penetrating the air vents of the
product to minimize the risk of damage to the product and to reduce
the risk of electric shock to the operator!
1. Dissolve dirt by first applying a detergent mixed with water to the
surface while still dry.Allow the detergent to soak into the surface for a
few minutes,but do not let the detergent dry.
2. When dealing with vertical surfaces work from the bottom upwards. Leave
the detergent to act for 1-2 minute(s) but do not allow the surface to dry.
Starting from the bottom, use the high pressure jet at a minimum distance of
30 cm. Do not allow the rinse water to run onto unwashed surfaces.
3. ln some cases, scrubbing the surface with a suitable brush is needed to
remove dirt. High pressure cleaning is not always the best solution for good
washing results, since it may damage some surfaces. The dirtblaster nozzle
adjustable nozzle jet setting should not be used on delicate or painted parts,
or on pressurised components (e.g. tyres, inflation valves, etc.).
4. Effective washing depends on both the pressure and volume of the water
used, to the same degree.
5. Begin by spraying in a test area free and clear of people and objects.
Fig. 19
operation
95813_IM_TTB1300.indd 26
95813_IM_TTB1300.indd 26
2020/9/23 上午9:23
2020/9/23 上午9:23
