20
© Titan Tool Inc. All rights reserved.
Fluid Section Assembly
O-Ring
Raised Lip
O-Ring
Raised Lip
7
2
1
3
4
5
27
9
25
10
11
12
13
14
15
16
17
18
19
20
21
22
6
8
Install each of the two
lower packings with the
raised lip and the o-ring
facing up.
Install the upper
packing with the raised
lip and the o-ring facing
down.
23
24
Item
Part #
Description
Quantity
1
700-735
Crank and slide connecting rod assy. .....1
2
730-508
Retainer ...................................................1
3
700-587
Upper guide.............................................1
4
700-603
Upper seal ...............................................1
5
700-804
Gasket .....................................................1
6
730-505
Pump housing .........................................1
7
700-678
Head cap screw ......................................2
8
700-601
Lower seal ..............................................2
9
704-089
Piston rod ................................................1
10
762-111
Seal .........................................................1
11
762-135
Upper cage..............................................1
12
762-144
Outlet valve ball.......................................1
13
762-134
Seat ........................................................1
14
762-057
O-ring ......................................................1
15
762-073
Outlet valve housing................................1
16
730-509
Bushing ...................................................1
17
700-821
Seal .........................................................1
18
730-510
Cage ........................................................1
19
762-145
Ball ..........................................................1
20
762-137
Inlet valve seat ........................................1
21
762-058
O-ring ......................................................1
22
704-054
Foot valve housing, low rider ....................1
730-511
Foot valve housing, high rider .................1
23
704-090
Piston assembly ......................................1
24
730-560
Foot valve assembly, low rider ................1
730-520
Foot valve assembly, high rider...............1
25
730-540
Fluid section complete, low rider
(includes items 2–4, 6, and 8–22) ............1
765-502
Fluid section complete, high rider
(excludes item 5) .....................................1
26
762-202
Packing tool (not shown).........................1
27
490-109
Fitting.......................................................1
Servicing/Repairing the Fluid Section
Before proceeding, follow the “Pressure Relief
Procedure” in the Operation section of this manual.
Additionally, follow all other warnings to reduce the risk
of an injection injury, injury from moving parts or electric
shock. Always unplug the sprayer before servicing!
1. Remove the safety plate (see the “Gear Box Assembly”
parts list).
2. Stop the sprayer at the top of its stroke so that the piston
is in its highest position. Turn off and/or unplug the
sprayer.
3. Remove the return tube with a wrench (see the “Siphon
Assembly” parts list).
4. Squeeze the retaining clip together (see the “Siphon
Assembly” parts list) and pull it down and out of the foot
valve (22).
5. Remove the siphon assembly by pulling it down and out
of the foot valve (22).
4. Tilt the pump back for easy access to the fluid section.
WARNING
NOTE: Repacking Kit P/N 730-401 includes items 3, 4,
5, 8, 10, 12, 14, 17, 19, 21, (packing grease P/N
700-203 and piston guide tool P/N 700-793 are
also included).
