EN
23
In
more
detail...
TTB926STM
by TITAN
Troubleshooting
EN
Problem
Possible cause
Solution
1. Product does
not start
1.1. Not connected to power
supply
1.2. Power cord or plug is
defective
1.3. Other electrical defect
to the product
1.1. Connect to power
supply
1.2. Check by a specialist
electrician
1.3. Check by a specialist
electrician
2. Product
does not
reach boiling
temperature
2.1. Extension cord not
suitable for operation
with this product
2.2. Power source (e. g.
generator) has too low
voltage
2.3. Safety cap not fitted
properly
2.1. Use a proper
extension cord
2.2. Connect to another
power source
2.3. Securely fit safety cap
3. Unsatisfactory
result
3.1. Boiling temperature not
reached
3.2. Insufficient amount of
water in water tank
3.3. Steam plate is partly
blocked
3.4. Excessive water in
steam plate
3.5. Heating element
covered with lime scale
3.1. Let the product pre-
heat for longer time
3.2. Add water in water
tank (see “Filling with
water”)
3.3. Remove the blockage
3.4. Remove excessive
water from time to
time
3.5. Cleaning the heating
element (see “Lime
scale removal”)
4. Abnormal
escaping
steam from
safety cap
4.1. Damaged pressure
release valve
4.2. Steam release
openings and / or
steam plate is blocked
4.1. Replace with a
suitable safety cap
4.2. Remove blockage
5. Escaping
steam from
hose /
connection
5.1. Loose connection
5.2. Damaged hose
5.3. Steam release
openings and / or
steam plate is blocked
5.1. Tighten connection
5.2. Replace with a
suitable hose
5.3. Remove blockage
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 23
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 23
2022/6/23 下午5:04
2022/6/23 下午5:04
