EN
16
Product functions
In
more
detail...
TTB926STM
by TITAN
EN
Intended use
This wallpaper stripper TTB926STM is designated with a nominal power of
2200 Watts.
This product is intended for wallpaper stripping and can also be used for some
cleaning tasks.
The product must never be left unattended while it is connected to power supply
or cooling down.
The product is to be used only for its prescribed purpose. Any other use is deemed
to be a case of misuse.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
WARNING!
Always disconnect the product from power supply and let
the product cool down before making adjustments to the product!
Pressure release valve
The safety cap (1) is equipped with a pressure release valve.
When the pressure inside the water tank (4) reaches its maximum level, the valve
automatically releases pressure and steam escapes from the openings on top of
the safety cap (1). If this happens, check that the hose (5) is not twisted or kinked.
This will stop once pressure level inside the water tank (4) decreases to suitable
levels.
WARNING!
Danger of scalding. Steam may escape from the pressure
release valve during and after use.
Thermal cut-out
The water tank socket (4b) is equipped with a thermal cut-out. In the event that
the product becomes overheated due to low or no water, the thermal cut-out
automatically switches the product off. After a cooling period the product resets
and automatically switches on again.
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 16
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 16
2022/6/23 下午5:04
2022/6/23 下午5:04
