21. Place depth gauge into rear slot
on machine. Adjust the pin for
desired height.
22. Assembly of the tines.
The tines are left and right handed
and are marked as such. Picture
shows one bar and tines required.
Repeat this for the other tine bar
and extension bar.
Lay one right handed tine onto tine bar, curling up.
Then place a left handed tine across this one,
curling down and bolt in the middle (left).
Repeat this to place all four tines around the bar.
Bolt all four corners tightly.
Repeat the above for the next 2 layers, ensuring all
bolts are VERY securely fastened.
