TITAN MODEL KITS KC-30 MRTT, Assembly Instructions Manual

Page: 6 / 36

I.A.3. Thin trailing edges:
As delivered, the trailing edges of the wings and tail parts are the thickness of the
plastic sheet used to produce them. If left alone, assembling raw parts will result in a
trailing edge that is too thick for scale. Using 220 grit sandpaper, thin all trailing edges
from the .090” material thickness to approximately .010”. Work slowly, checking
thickness and consistency as you go. This will result in trailing edges that are more
“to-scale”
© Titan Model Kits Revision 1.0 6 Mar 2022
6