TITAN MODEL KITS KC-30 MRTT, Assembly Instructions Manual

Page: 3 / 36

Table of Contents
I. Parts Preparation
A. Vacform Parts
1. Remove parts from sheet
2. Remove stock thickness
3. Thin trailing edges
4. Drill out engine and flap track attachments
5. Cut out wing & tail passthroughs
6. Cut out NACA vent holes
7. Install 90° angle styrene reinforcement strips
8. OPTION: Landing Gear Cutouts
B. Resin Parts
1. Remove support columns
2. Sand support column attach points
II. Assembly
A. General
B. Instructions
1. OPTION: Install wheel wells
2. Install APU
3. Assemble horizontal tail
4. Assemble wing top and bottom
5. OPTION: Install clear cockpit windows
6. Assemble fuselage halves
7. Join the wings
8. Install flap track fairings
9. Install wing roots and trailing edge fillets
10. Install engines
11. OPTION: Assemble and install landing gear
12. Install antennas & resin detail parts
III. References
© Titan Model Kits Revision 1.0 6 Mar 2022
3