background image

2

DAILY MAINTENENCE

1.  Insure all bolts are secured and snug with lock washer, nylon lock nuts, or cotter pins.

2.  Jack locking mechanism should be cleaned and lubricated to operate properly.

3.  Check locking mechanism for safety.

4.  Check cylinders and hose for loose connections and leaks.

5.  Check oil level in pump reservoir tank.

SAFETY PRECAUTIONS

SPECIFICATIONS

1.  Load should not exceed rated capacity for this jack – 6000lbs

2.  Only trained people should operate the jack.

3.  Indoor use recommended.

4.  Do not move the jack while loaded.

5.  Keep hands, tools, and other extremities from any moving parts.

6.  Maintain a safe working environment. The work area should be clean, dry, clutter free and sufficiently lit.

7.  Wear proper safety attire.  Do not wear loose fitting clothing while operating jack, long hair and sleeves should be secured.

8.  Keep children and bystanders away from work area.  Do not let children operate or play on jack.

9.  Do not use if under the influence of drugs or alcohol.  Operator must be alert at all times when using heavy lift equipment.

10. Never operate the jack with someone on it.

11.  Use this jack only for the work it is intended.  Do not use this product for an application for which it was not designated.  

 

Misuse can lead to personal injury and/or property damage.

12. Place safety jack stands (not included) under the vehicle to prevent the vehicle from falling in case the jack should lower  

 unexpectedly. 

       WARNING:

 NEVER GO UNDER A RAISED VEHICLE UNLESS THERE ARE SAFETY JACK STANDS IN PLACE.

       WARNING:

 VEHICLE WHEELS MUST BE CHOCKED & PARKING BRAKE SET PRIOR TO USING THIS JACK.  

Lifting Capacity

Railway Width

Lifting Pad Width

Lowered Height(min)

Raised Height(max)

6,000 lb

37” - 52.25”

39.5” - 58.75”

5.5”

21”

Compressed Air Supply

Reservoir Capacity

Hydraulic Fluid Type

45 - 145 psi

20.25 oz

ISO 32 or AW 32 weight 

non-foaming, non-detergent

Summary of Contents for RJ-6K-HP

















Reviews: