9
BLEEDING
CHECKING & FILLING HYDRAULIC FLUID
NOTE:
If the lift appears not to be working properly, it may be necessary to bleed trapped
air from the hydraulic system.
1.
Check fluid level. Replace Fill Cap.
2. Depress and hold release handle.
3. Press the button to raise the lift while depressing the release handle.
4. Let up on release handle.
5. Raise the lift. If the lift does not elevate smoothly, repeat steps 2-5.
1.
Lower the lift completely. Remove the fill cap.
2.
The oil level should be even within the minimum and maximum range on the fill cap
dipstick.
3.
If the fluid level is low, add premium quality ISO-32, AW-46 hydraulic oil.
DO NOT USE
ANY OTHER FLUID OR BRAKE FLUID.
