background image

3

SAFETY PRECAUTIONS

1.  Load should not exceed rated capacity for this lift - 1,500lb
2.  Make sure the handle is in the down position and the safety plate is set in the safety 

lock while the lift is in the raised position.

3.  Move the lift only when it is lowered.
4.  Do 

NOT

 ride vehicle onto lift.

5.  Only trained people should operate the lift.
6.  Power Unit pump should be at least 3 feet away when operating. Remain clear of the lift 

when raising or lowering.

7.  Indoor use recommended.
8.  Do 

NOT

 move lift while loaded.

9.  Keep hands, tools and other extremities from under carriage and moving parts.
10. Maintain a safe working environment. The work area should be clean, dry, clutter free 

and sufficiently lit.

11. Wear proper ANSI-approved safety attire. Do 

NOT

 wear loose fitting clothing while 

operating lift, long hair and sleeves should be secured.

12. Keep children and bystanders away from work area. Do 

NOT

 let children operate or play 

on lift.

13. Do 

NOT

 use if under the influence of drugs or alcohol. Operator must be alert at all 

times when using heavy lift equipment.

14. Never operate the lift with someone on it. 

Do 

NOT

 adjust safety valve.

15. Use this lift only for the work it is intended. Do 

NOT

 use this product for an application 

for which it was not designed. Misuse can lead to personal injury and/or property 

damage.

16. Industrial applications must follow OSHA requirements.
17. Do 

NOT

 use for aircraft purposes.

18. 

Have your lift serviced by a qualified technician using only identical Titan Lifts

®

 

replacement parts and attachments. This will ensure that the safety of the lift is 

maintained.

PLEASE  READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY 

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.  THE MANUFACTURER OR DISTRIBUTOR 

DOES NOT MAKE ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR 

SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO 

REPLACE ANY PARTS OF THE PRODUCT.  THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY 

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE PERFORMED BY CERTIFIED AND 

LICENSED TECHNICIANS, AND NOT BY THE BUYER.  THE BUYER ASSUMES ALL RISK AND LIABILITY 

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS 

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Product’s Serial Number:____________________________________________________________________

Note: 

 If product does not have a serial number, record the month and year of purchase instead.

Note:

  Some parts are listed and shown for illustration purposes only, and are not available individually as  

             replacement parts.

Summary of Contents for HDML-1500XLT-E

















Reviews: