36
9.3.2
Receiving CAN frames
When CANHacker receives CAN frames from another CAN node, it will show all CAN
frame messages in the middle of main panel. The CAN frame messages includes ID,
DLC, Data, Period, Count.
9.3.3
Sending CAN frames
CANHacker provides many parameters for sending CAN frames to another CAN node,
you can set the following parameters on the bottom of the main panel for CAN data
transmission:
Select transmit an extended CAN Frame (29 bits ID) or a standard CAN frame (11 bits
ID).
Check “29 Bit Id”
to transmit an extended CAN Frame (29 bits ID) and
uncheck “29 Bit Id”
to transmit a standard CAN frame (11 bits ID).
Select remote request frame mode or transmit CAN frame mode.
Check “RTR”
for a remote request frame mode or uncheck “RTR”
for transmit CAN frame mode.
Enter CAN frame messages in the respective fields, including ID, DLC, Data.