Titan Electronics NCOM SERIAL 4XX Series, User Manual

Page: 26 / 94

25
5.3 RFC2217 Client Mode
In RFC2217 Client Mode, NCOM-413 can establish a TCP connection with a pre-
determined host computer or a serial device server working in RFC2217 Server Mode.
You need to define the IP address (telnet server’s IP) to establish a TCP connection
with a pre-determined host computer or a serial device server.
Under the “HOME” page of NCOM-413’s firmware, select “NETWORK SETTINGS” to
find the “Port 1/2/3/4 Mode Settings” window. Under “Mode”, select “RFC2217-Client”
and type “Telnet Server’s IP” and “Port” respectively (e.g. 192.168.1.147 Port: 2000)
to establish a TCP connection with a pre-determined host computer or a serial device
server. Check the “Make these the default settings” box and click “Apply Changes” to
set your NCOM-413 into RFC2217 Client Mode.