72
8.7.3.2 Changing Network Operation Mode
To change the network operation mode of a virtual serial port, click “Port 1” under
“COM Port Status”. Under “Network Settings”, you may choose “Driver Mode”,
“RFC2217 - Server”, “RFC2217 - Client”, “TCP Raw - Server”, “TCP Raw - Client”, “Pair
Connection Master Mode”, “Pair Connection Slave Mode” and “UDP” depending on
your application.
After selecting an operation mode, click “Update” to set your NCOM-113-M into the
proper operation mode.
After clicking “Update” to set your NCOM-113-M’s operation mode, a message will
indicate “Update Success!!”.
Click on “OK” to finish change operation mode procedure.
If you want to save the new operation mode as defaults, you need to check on “Set
Default” and click on “Update”. When the new operation mode is saved, a message
will indicate “Update Success!!”.
