46
8.2 Manually Add Virtual Serial Port for NCOM Devices
After opening NCOM Virtual Serial Port Manager, click “Add” to open the “Add
connection” window.
Under “Add connection”, select an available COM port (e.g. COM2. Note that NCOM
Virtual Serial Port Manager will show your next available COM port) and type your
NCOM device’s IP address and port in “IP Address” and “Remote Port” respectively
(e.g. IP Address: 192.168.254.254 Port: 2000). After setting the COM port, IP address
and remote port, click “OK” to add a new virtual serial port.
After adding a new virtual serial port for NCOM devices, you will find information
about the virtual serial port in the main window of NCOM Virtual Serial Port
Manager.
