30
6.1 Port 1 Settings
The “PORT 1 SETTINGS” include “SERIAL SETTINGS” and “NETWORK SETTINGS”.
Click “SERIAL SETTINGS” to display the current serial port settings for NCOM-113-M.
To modify the serial settings for a particular port, select appropriate options located
on the right side of “Port 1 Serial Settings”.
You can modify the following serial parameters for your NCOM-113-M serial device
server:
Serial Parameters
Setting
Default Values
Mode
RS-232, RS-422, RS-485 4W, RS-485 2W
RS-232
Baud Rate
300bps to 921600bps
115200bps
Data Size
5, 6, 7, 8 bits/character
8 bits/character
Parity Check
None, Odd, Even, Mark, Space
None
Stop Bits
1, 2, 1.5 bit(s)
1 bit
Flow Control
None or Hardware
None
Note: The default mode for NCOM-112-M is RS-422 mode.
After you modify the serial parameters for your NCOM-113-M, please check the
“Make these the default settings” and click “Submit” to update the serial parameters
for your device.
Click “NETWORK SETTINGS” to display the current network settings for NCOM-113-
M. To modify the operation mode, refer to Chapter 5 for more detailed information.
You can also modify the network parameters of NCOM-113-M. To modify the
network parameter settings, select appropriate options located on the right side of
“Port 1 Mode Settings”. Options include “Local Telnet Port Number”, “Telnet
Timeout”, and “Keep alive time”.
