Kronus
®
2, 3, and 4 Revision
Due to user feedback we have now implemented a programming change for the Kronus
®
2, 3 and
4 which allows the user to disable the 10 minute delay when switching from the CO
2
Output to the
EXHAUST Output. They will now come programmed with NO delay meaning when the CO
2
outlet
is defeated the EXHAUST outlet will activate immediately. The diagrams below will explain how to
change the delay.
DELAY ON
DELAY OFF
Turn knobs to MIN position while
system is OFF.
Turn knobs to MAX position while
system is OFF.
Turn knobs to MAX position within 5 sec-
onds after turning system ON. The CO
2
and EXHAUST indicator LEDS will cycle
to show that it was done properly.
Turn knobs to MIN position within 5
seconds after turning system ON. The
CO
2
and EXHAUST indicator LEDS will
cycle to show that it was done properly.
www.titancontrols.net
PUB:03142013
1-888-808-4826
