Kronus 4
• Warnings & Cautions
• Kronus 4- Temperature, Humidity, CO², Day and Night Controller
• Instructions for Operation
• Troubleshooting Tips
• Controller Specifications
• Installation Example
• Warranty Information
• Service and Repair Program
Warnings & Cautions
• Read all instructions before operating controller.
• Do not put your controller in an area where it can get wet or sprayed.
• Mount your controller securely to the wall using hardware provided.
• When using “bug bombs” in area, cover controller completely to avoid corrosion.
• There are no serviceable parts in controller. Do not attempt to repair the unit.
• Breaking “warranty” seal will void your warranty.
• Do not put paperclips, tools, etc. into unit. Possible electrocution may occur.
• Plug controller into surge protector to avoid potential damage to the unit.
• Make sure to verify your power source prior to plugging controller into outlet.
• Check that all equipment that will be activated by this controller is the proper voltage.
• Verify that your equipment does not exceed a total of 15 amps.
• This controller is designed for inside use only.
• Avoid placing the controller near heat generating sources.
• Use caution when operating controller in extremely humid environments.
• Do not use controller for purposes other than the unit was designed to function
• Use controller within defined environmental specifications.
• Ask your Dealer for tips and techniques regarding the use of this controller.
• Be conscientious when disposing of any products.
• Enjoy your Titan Controls environmental controller for years to come!
Kronus 4 – Temperature, Humidity, CO²,
Day and Night Controller
The Kronus 4 is used to maintain the temperature, humidity and CO² during the day and night
in your growing environment. Both the temperature and humidity can be adjusted by setting the
dials on the front of the controller to your preferred settings. There is a convenient “Grow Zone”
section on each dial to give the gardener an easy to use reference point for plant success. During
the daytime hours the controller leaves the “CO² On” active until the temperature set point is
exceeded. When this happens the ‘CO² ON’ is deactivated and then the controller begins a ten
(10) minute, “environmental polling process”. If after ten (10) minutes the temperature still exceeds
the setting, then the ‘Exhaust Fan Output’ is activated and your fan will run until the temperature
is lower than the set point. After the temperature has lowered below the selected temperature
level, the ‘CO² On’ LED will light up and your CO² system is reactivated. This innovative function
serves two purposes: One, this allows maximum CO² coverage with minimum CO² waste and
WARRANTY SERVICE
If after reviewing the troubleshooting tips the unit will still not work, you should return it to the
Dealer where you purchased it. They will be able to further evaluate the unit and test its various
components and quite possibly will be able to identify and/or fix any problems. If the Dealer is
unable to fix the unit, they will return it to us for factory repair.
If there are no Dealers in your area, you may contact us directly for technical support. If we
cannot help you resolve the problem over the phone, we will issue you a RMA number (Return
Merchandise Authorization) authorizing you to return the unit to us for factory reconditioning (if the
unit is under warranty). Contact the number below for a RMA and shipping address. Complete the
form below and include it with your unit. Also please write the RMA # on the outside of the box.
Please package the unit in its original packaging. If it is damaged in shipment we cannot be
responsible.
Once we receive the unit back, we will repair it within 48 hours (business) and return it to you
freight prepaid via FedEx or UPS ground shipment.
Include the following if returning directly to Titan Controls
•
Proof of purchase • This completed form • RMA # on the outside of the box
Return Merchandise Authorization Number (Required
Company Name: ____________________________________________________________________________________
Contact Name: _____________________________________________________________________________________
Address: __________________________________________________________________________________________
____________________________________________________________________________________________________
Phone #: ___________________________________________________________________________________________
Email address: _______________________________________________________________________________
What is the nature of the problem?
______________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
_______________________________________________________
Send to your nearest location – shipping address will be given when the RMA # is issued:
www.titancontrols.net
For technical assistance call us at 1-888-80-Titan or 1-888-808-4826.
®
