2
3
Basic CO
2
Controller
• Warnings and Cautions
• Factory Settings
• Basic CO
2
Controller Overview
• Instructions for Operation
• Error Codes
• Controller Specifications
• Controller Diagrams
• Installation Options
• Installation Example
• Warranty Information
• Service & Repair Program
Warnings & Cautions
SULFUR VAPORIZER WARNING
If a sulfur vaporizer is used, first remove the remote sensor from area or
turn the controller OFF and cover the remote sensor probe with a protective
plastic bag. Remove the bag before turning the power back on.
Note: Failure to protect the sensor during Sulfur use will result in
damage to the infrared CO
2
sensor and void warranty.
• Read all instructions before operating controller.
• Do not put your controller in an area where it can get wet or sprayed.
• Mount your controller securely to the wall.
• When using “bug bombs” in area, cover controller completely to avoid
corrosion.
• There are no serviceable parts in controller. Do not attempt to repair the
unit.
• Breaking tamper proof seal will void your warranty.
• Do not put paper clips, tools, etc. into unit. Possible electrocution may
occur.
• Plug controller into surge protector to avoid potential damage to the unit.
• Confirm that your power source is 120 volts/15 amps prior to plugging
controller into outlet.
