background image

21 

 

ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY 

 

The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty 
claim that might be presented for a claimed defect in material or workmanship of the product, you accept 
and assume full responsibility for any and all injuries, damages (both economic and non-economic), and 
losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, 
employees, officers, directors, associates, and agents from any and all claims, demands, damages, 
rights of action, or causes of action, present or future, whether the same be known or unknown, 
anticipated, or unanticipated, resulting from or arising out of the use of said equipment. 
 

This equipment must be used with care by capable and competent individuals under supervision, 
if necessary. 

 

WARNING 

 

Do not overfill! 

Mower should be level 

when checking oil in gear box. 

some activities might be able to cause 

electric shock 

 

 

 

Sharp objects may be involved. 

Use protective cover during maintenance. 

 

 

TITAN LIMITED WARRANTY: TERMS, EXCLUSIONS AND LIMITATIONS OF REMEDIES 
 

This product comes with a one (1) year limited warranty that can be found at 

www.palletforks.com/warranty.html

.

 

Please review the same for all details regarding the 

Titan Limited Warranty.

 

 
THE TITAN LIMITED WARRANTY FOUND AT 

WWW.PALLETFORKS.COM/WARRANTY.HTML 

IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY 
IMPLIED WARRANTY OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE, EACH 
OF WHICH IS HEREBY DISCLAIMED.

Summary of Contents for 198374























Reviews: