Titan Attachments 198374, Operator'S Manual

Page: 10 / 22

10
USING YOUR LOG SPLITTER
1.
DO NOT at any time carry passengers, sit, or stand on the log splitter.
2.
Check the hydraulic oil level and visually inspect all hoses and attachments for problems.
3.
Inspect the engine and make sure the engine oil level is correct.
4.
Before towing the log splitter, the tires need to be fully inflated.
5.
Refer to the vehicle owner’s manual for proper safety and towing instructions.
WARNING
Before operating or using the log splitter, review the instructions below and all safety information.
Failure to follow these instructions may result in property damage or injury to the operator or
bystanders.
WARNING
ALWAYS use the log splitter for its intended use.
ONLY use the log splitter to split wood logs, length wise with the grain.
NEVER modify, alter, or change the log splitter in anyway, modifications will void the
warranty.
NEVER attach a rope, cable, or other device to the control lever on the log splitter.
ONLY operate the log splitter in daylight.
NEVER leave the log splitter unattended while the engine is running.
DO NOT change the splitting position with the engine running. Contact with the muffler
can cause serious burns.
ALWAYS make sure the beam is in the locked position.
DO NOT let the beam drop as it could crush fingers or cause damage to the log splitter.
NEVER operate or let anyone else operate, the log splitter while under the influence of
alcohol, drugs, or medication.
TIRE WARNING
DO NOT over inflate tires. Serious injury can result if tires explode.
DO NOT tow the log splitter if the tires are worn or will not hold air.
DO NOT exceed the maximum 45 MPH towing speed.
TOWING WARNING
Serious injury or death can occur if towing safety rules are not followed.
Always use safety chains, secure, and lock the log splitter to the vehicle hitch before moving. Drive
safely. Be aware of the added length of the log splitter.
Never exceed the maximum travel speed of 45 mph. Never ride or transport cargo on the log
splitter.
Turn off the vehicle before leaving the log splitter unattended. Block the log splitter wheels to
prevent unintended movement.
OPERATION INSTRUCTIONS