Page
8
Electric Oven
User Manual
IMPORTANT WARNINGS FOR INSTALLATION:
Cooling fan shall take extra steam out and prevent outer
surfaces of appliance from overheating during operation of
oven. This is a necessary condition for better appliance
operation and better cooking.
Cooling fan shall continue operation after cooking is
finished. Fan shall automatically stop after cooling is
completed.
Figure 1
A clearance must be left behind the enclosure where you'll place the appliance for efficient and
good operation. This clearance shouldn't be ignored as it's required for ventilation system of the
appliance to operate.
RIGHT PLACE FOR INSTALLATION
Product has been designed to be mounted to worktops procured from market. A safe distance must
be left between the product and kitchen walls or furniture. See the drawing provided on the next page
for proper distances. (values in mm).
•
Used surfaces, synthetic laminates and adhesives must be heat resistant. (minimum 100°C).
•
Kitchen cupboards must be level with product and secured.
•
If there is a drawer below the oven, a rack must be placed between oven and drawer.
WARNING:
Do not install the product next to refrigerators or coolers. The heat emitted by the product
increases the energy consumption of cooling devices.
WARNING:
Do not use door and/or handle to carry or move the product.
90cm BUILT-IN OVEN INSTALLATION AND MOUNTING
Place of use for product must be located before starting installation.
Product mustn't be installed in places which are under the effect of
strong air flow.
Carry the product with minimum two people. Do not drag the product
so that floor isn't damaged.
Remove all transportation materials inside and outside the product. Remove all materials and
documents in the product.